1. Other Hvac Parts For Sale
  2. sku: 17133222903806762
  3. ICP 1193776

ICP 1193776 Furnace Control Board Keeprite Tempstar Heil Comfortmaker

1193776 Icp Furnace Control Board Keeprite / Tempstar Heil Comfortmaker

( Brand: Icp ), ( Manufacturer Part Number: 1193776 ), ( Type: Furnace Control Board )

Review ICP Furnace Control Board Keeprite Tempstar Heil Comfortmaker

The **ICP 1193776 Furnace Control Board** from **Keeprite, TempStar, Heil, and ComfortMaker** is a high-performance, precision-engineered electronic control module designed to regulate and optimize the operation of modern gas-fired furnaces with advanced heating demands. This robust board integrates seamlessly into residential and light-commercial HVAC systems, ensuring efficient temperature management, enhanced energy savings, and extended equipment longevity. Built with cutting-edge digital circuitry and a user-friendly interface, the control board features a **modulating gas valve control system**, allowing for precise modulation of burner output to maintain consistent indoor comfort while adapting to varying thermal loads. Its **self-diagnostic capabilities** provide real-time fault detection and error codes, simplifying troubleshooting for technicians and reducing downtime. The board supports **two-stage heating operation**, enabling smoother transitions between low and high-fire modes for improved efficiency and reduced wear on furnace components. Compatible with a wide range of **80% to 98% AFUE (Annual Fuel Utilization Efficiency) furnaces**, this control board is engineered to work with **modulating condensate pumps, induced draft blowers, and electronic ignition systems**, ensuring seamless integration with modern high-efficiency HVAC setups. Constructed with high-quality, flame-retardant materials and reinforced electrical connections, it operates reliably in both residential and light-commercial environments, offering durability in varying temperature and humidity conditions. Whether installed in a newly constructed home or retrofitted into an existing system, this control board delivers **superior performance, energy efficiency, and long-term reliability**, making it an essential component for homeowners and HVAC professionals seeking advanced furnace control technology.

### **Pros and Cons of buying a ICP 1193776 Furnace Control Board (Keeprite TempStar/Heil/ComfortMaker)**

#### **Pros:**

1. **Compatibility** This control board is designed specifically for Keeprite TempStar, Heil, and ComfortMaker furnaces, ensuring a direct fit without major modifications. It is a direct replacement part, reducing installation complexity.

2. **Reliability** As an OEM (original equipment manufacturer) or high-quality aftermarket part, it should function as intended, reducing the risk of frequent failures compared to generic or low-quality replacements.

3. **Energy Efficiency** Modern control boards often include improved circuitry that can enhance furnace performance, leading to better temperature regulation and potentially lower energy consumption over time.

4. **Warranty Coverage** Many reputable suppliers offer warranties on replacement parts, providing peace of mind in case of defects or early failure.

5. **Ease of Installation** Since it is a direct replacement, installation typically requires minimal adjustments, making it a straightforward DIY project for those with basic electrical and HVAC knowledge.

6. **Compatibility with Smart Thermostats** Some newer control boards support communication with smart thermostats, allowing for remote control and better automation of heating systems.

7. **Reduced Downtime** Replacing a faulty control board quickly restores furnace functionality, preventing prolonged heating disruptions, especially during cold weather.

---

#### **Cons:**

1. **Cost** Replacement control boards can be expensive, often ranging from $150 to $300 or more, depending on the supplier and brand. This may be a significant upfront cost for homeowners on a tight budget.

2. **Potential Counterfeit Parts** Purchasing from untrusted sellers increases the risk of receiving a counterfeit or low-quality part that fails prematurely. Always buy from authorized dealers or reputable suppliers.

3. **Technical Knowledge Required** While installation is often straightforward, improper handling of electrical components can pose safety risks, such as short circuits or damage to the furnace. Those without experience may need a professional installer.

4. **Compatibility Issues** Even if the part is listed as compatible, slight variations in wiring or firmware between models can sometimes cause problems. Double-checking the exact furnace model and control board specifications is essential.

5. **Labor Costs (If Professional Installation)** If hiring an HVAC technician to install the board, labor fees (typically $100 $200) add to the total cost, making the repair more expensive.

6. **Limited Lifespan** Like all electronic components, control boards eventually wear out. If the furnace itself is old, replacing just the control board may not be a long-term solution, and a full system upgrade might be needed sooner rather than later.

7. **Learning Curve for DIYers** First-time DIYers may struggle with troubleshooting issues like incorrect wiring, faulty sensors, or communication errors between the board and thermostat.

---

### **Conclusion**

The **ICP 1193776 furnace control board** is a viable replacement for Keeprite TempStar, Heil, and ComfortMaker furnaces, offering reliability, efficiency, and ease of installation when sourced from a trusted supplier. However, the cost and potential risks of counterfeit parts or installation errors must be carefully considered.

For homeowners comfortable with basic electrical work and willing to verify the part s authenticity, this replacement can be a cost-effective solution to restore furnace functionality. Those unsure about installation or dealing with an older furnace system may benefit from consulting an HVAC professional to assess whether a full system upgrade is more economical in the long run.

---

### **Recommendation**

1. **Verify Compatibility** Confirm that the part number (ICP 1193776) matches your exact furnace model by checking the label inside the furnace or consulting the manufacturer s documentation.

2. **Purchase from a Trusted Source** Buy from authorized dealers, reputable online retailers (e.g., HVAC supply companies, Amazon with verified sellers), or directly from the manufacturer to avoid counterfeit parts.

3. **Consider Professional Installation** If unsure about wiring or electrical safety, hire a licensed HVAC technician to install the board, especially if the furnace is older or has complex wiring.

4. **Check for Warranty** Ensure the part comes with a warranty to protect against defects. Some suppliers offer extended warranties for an additional fee.

5. **Evaluate Long-Term Needs** If the furnace is 15 years old or frequently requires repairs, weigh the cost of replacing just the control board against the potential savings of a full system upgrade for better efficiency and reliability.

6. **Test Thoroughly After Installation** Once installed, run the furnace through its cycles to confirm proper operation, checking for error codes or unusual behavior that may indicate wiring or compatibility issues.

**Final Verdict:** For those with a confirmed match and access to a reliable part, this control board is a practical replacement. However, weigh the pros and cons against the age of your furnace and your comfort level with DIY repairs before proceeding.

Details:

This control board serves as the central controller for furnace, managing and regulating various functions such temperature settings, system operation, safety features. Its reliable performance and compatibility with leading furnace brands make it a vital component for ensuring efficient effective heating system operation.#3 in box ready to go The 1193776 ICP Furnace Control Board is designed use HVAC systems, specifically like Keeprite, Tempstar, Heil, Comfortmaker.

part #: 1193776 prices

  • $159.95-$316.57

specifications hvaapa:

  • brand: Icp
  • mpn: 1193776
  • type: Furnace Control Board

offer hvaapa:

  • options: Ship-to-home
  • availability: In Stock
  • best offers: True
  • started: March 15, 2026
  • sold: 0
  • quantity: 1

returns hvaapa:

  • method: Money back
  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Buyer

payments hvaapa:

  • other
  • wallet: Apple-pay
  • credit card: Mastercard

seller hvaapa:

  • rating: 100.0%
  • city: Round Lake, Illinois
  • # reviews: 198

shipping hvaapa:

  • cost: $0.00
  • service: USPS Ground Advantage
  • class: Standard
  • carrier: USPS
  • type: Calculated
  • transit: 4-10 Days

general hvaapa:

  • HVAC Refrigeration > HVAC Refrigeration: Parts Accessories > HVAC Refrigeration: Controls Circuit Boards
  • condition: Used
type: furnace control board,
category: business & industrial > hvac refrigeration > hvac refrigeration: parts accessories > hvac refrigeration: controls circuit boards, sku: 17133222903806762,
Icp 1193776 Is Similar To:
hvaapa logo
3 offers $159.95–$316.57 USD
  • Used. Offer #1 priced at $159.95 + $0.00 shipping estimate = $159.95* total. Its reliable performance and compatibility with leading furnace brands make it a vital component for ensuring efficient and effective heating system operation.#3 in box ready to go The ICP Furnace Control Board is a component designed for use in HVAC systems, specifically with brands like Keeprite, Tempstar, Heil, and Comfortmaker.FREE SHIPPING
  • New. Offer #2 priced at $316.57 + $0.00 shipping estimate = $316.57* total. Product Information. MPN : .FREE SHIPPING
  • New. Offer #3 priced at $310.95 + $0.00 shipping estimate = $310.95* total. ICP Circuit Board.FREE SHIPPING

Copyright © hvaapa.com